Removal and installation of the pallet of a case of the engine

Removal

Details of installation of the pallet of a case of the engine

3 — the Drain stopper
14, 15 — Oil pipelines
18 — the oil level Sensor
19 — the Bolt
L3 — the speed Sensor

20 — the Directing pipe of the probe of measurement of level of oil with a flange and an epiploon
28 — the Forward support of the engine
45 — the Pallet
45a — Laying


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Merge motive oil.
3. Remove a fan casing.
4. Unscrew the sensor of the speed (L3) from the pallet.
5. Disconnect the conducting socket from the sensor of level of oil (18).
6. Turn off the directing pipe of the probe of measurement of level of oil with a flange (20).
7. Disconnect oil pipelines (14) and (15).
8. Turn off nuts of fastening of the stabilizer (21d) on both sides.
9. Turn off forward support of the engine (28) and lift it by means of the elevator.
10. Remove springs of a forward suspension bracket.
11. Turn off bolts (31d) of steering.
12. Lift a forward axis by means of a jack.
13. Turn off bolts of fastening of forward axis (22).
14. Lower a forward axis.
15. Turn off bolts (19) of fastening of the pallet (45).
16. Remove the pallet (45) together with laying (45a).

Installation

Installation is carried out as it should be, the return to removal







79c5991e