Removal and installation of the case of an oil filter

Removal

Details of installation of the case of an oil filter

1 — the Tube of recirculation of the fulfilled gases
2 — the Tube to the sensor of pressure of oil (engines 601.911)
9 — Consolidations
270 — Laying

271 — the Nut of fastening of a cover
273 — the Cover of the oil pump
275 — the Case of the oil pump
280 — the Filtering element
296 — the oil pressure Sensor


 PERFORMANCE ORDER

1. Remove the air cleaner.
2. Turn off a bolt (276) of fastening of a cover of an oil filter.
3. Remove the filtering element (280).
4. Disconnect a tube (1) between the valve of recirculation of the fulfilled gases and the inlet pipeline or a turbocompressor from the case of an oil filter.
5. Turn off the forcing tube (2).
6. Disconnect the conducting socket from the sensor of pressure of oil (296).
7. Turn off a bolt (291) from a flange of an oil filter.
8. Remove the case of an oil filter (275) from the block of cylinders together with laying (270).
9. Wipe sealing surfaces and replace laying (270).

Installation

Installation is carried out as it should be, the return to removal. Replace consolidations (9).
79c5991e