Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
- Coupling
   + Coupling
   Driveshaft
   - Power shafts
      Removal and installation of a flange of a power shaft and radial-stop ball bearing
      Removal, check and installation of a power shaft
      Removal and CV JOINT installation of power shafts and their protective covers
   + Differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal, check and installation of a power shaft

Removal

PERFORMANCE ORDER

1. Remove final system from flange connection.
2. On models to 05/95 at removal of the right power shaft remove a cable guide from ABS/ASR.
3. Disconnect the operating lever from the regulator of level of a body or the sensor of level of a body (model with ADS).
4. Uncover the fuel pump (petrol engines).
5. Turn off a nut of fastening of a power shaft.
6. Remove a back wheel.
7. Take power shafts from flanges of wheels.

8. Disconnect power shafts (37) from transmission flanges.

Check

Check CV JOINTS, protective covers and covers for absence of damage and leaks.

Installation

Installation is carried out as it should be, the return to removal.