Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car


Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
- Cooling systems, heating
   Specifications
   - Engine cooling system
      Replacement of cooling liquid - general comments
      Removal and replacement of hoses of the cooling system
      Check of the thermostat
      Removal and installation of the thermostat
      Removal and installation of a radiator of the cooling system - an installation detail
      Removal and installation of the water pump
   + Systems of ventilation, heating and air conditioning
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

79c5991e

Removal and installation of a radiator of the cooling system - an installation detail

Details of installation of a radiator of the cooling system

Details of installation of a radiator of the cooling system on petrol models of the M104.94/99 series


1 — Nizhny Novgorod a protective guard
2 — the Top cross beam
3 — the Condenser
4 — the Radiator
5 — a fan Casing
6 — a casing Ring
7, 8 — AT Oil pipelines

9, 10, 11, 12 — cooling system Branch pipes
13 — Plastic tapes
14, 15, 18 — Clamps
19 — Rubber support
20 — the Lever
21 — the Adjusting bolt



Details of installation of a radiator of the cooling system on diesel models of the OM603.971 series

1, 2, 2a, 4, 15, 16 — Clamps
5 — Fingers
6, 7 — Panels
8 — the Collar
9 — the Radiator

10, 14 — cooling system Branch pipes
11 — a fan Casing
17 — the Ring
18 — the Cover

Removal (on the example of diesel model with the engine of the OM606.961 series with AT)

Details of installation of a radiator of the cooling system on diesel models of the OM606.961 series



 PERFORMANCE ORDER

1. Remove the lower protective guard of the engine.
2. Merge cooling liquid.
3. Pick up the phone of supply of compressed air (110).
4. Remove clamps (15) and (16).
5. Remove the fan coupling.
6. Remove a fan casing.
7. Disconnect the AT (13) pipelines and (14) from a radiator.
8. Disconnect branch pipes (10), (11) and (12).
9. Remove a forward cross beam (2).
10. Remove a radiator (10).

Installation

Installation is carried out as it should be, the return to removal.