Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Angles of installation of wheels of the car, clearance
   - Forward suspension bracket
      Adjustment of a gap in the bearing of a forward wheel
      Removal and installation of the lower spherical support
      Check of a condition of the top spherical support
      Replacement of the top cross lever
      Replacement of the lower cross lever
      Removal, check and installation of a nave of a forward wheel
      Removal and installation of assembly of a rotary fist
      Removal and installation of a screw spring
      Removal and installation of the stabilizer of cross stability
      Removal and installation of the shock-absorber
      The regulator of clearance of a forward suspension bracket - an installation detail
   + Back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment

Replacement of the top cross lever

Removal

PERFORMANCE ORDER

1. Separate a rotary fist (5) from the top lever (6), - in case of need use a stripper No. 140 589 02 31 00. Try not to allow tension of a brake hose and an electrical wiring.
2. Turn out nuts (6b) of fastening of the holder of bearing axial assembly (6a) to a frame.

Installation

PERFORMANCE ORDER

1. At installation act as it should be, the return to an order of dismantle of components.
2. Having installed the lever on a frame, tighten nuts of fastening of an axial part with effort of 50 Nanometers, then weaken axial самоконтрящуюся a nut (6e) and adjust position of the lever so that the distance And appeared equal 63 mm. Tighten самоконтрящуюся a nut with effort of 120 Nanometers.
3. Самоконтрящуюся a nut of fastening of the lever to a rotary fist tighten 125 Nanometers with effort.