Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Angles of installation of wheels of the car, clearance
   + Forward suspension bracket
   - Back suspension bracket
      Stupichny assembly - installation details
      Removal and installation of a screw spring
      The stabilizer of cross stability - an installation detail
      Removal and installation of the shock-absorber
      Removal and installation of a back depreciation rack (model with hydraulic adjustment of a suspension bracket)
      Check of the hydraulic pump
      Removal and installation of the accumulator of pressure of a hydraulic actuator of a back suspension bracket (model with a code 217a "A self-regulating back suspension bracket with ADS" and a code 480 "Management of clearance of a back suspension bracket")
      Removal and installation of the control unit of clearance of a back suspension bracket
      Damping valves - installation details
      Removal and installation of the valve of adjustment of clearance
      Regulator of clearance of a back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment

Removal and installation of a back depreciation rack (model with hydraulic adjustment of a suspension bracket)

Removal

Back depreciation rack (models with hydraulic adjustment of a suspension bracket)

PERFORMANCE ORDER

1. Remove the decorative panel in a luggage carrier.
2. Turn off the top nut of fastening of the shock-absorber.
3. Merge liquid from the hydraulic pipeline.
4. Disconnect the forcing pipeline (P4) in the place where the steel tube connects to rubber.
5. Uncover the lower lever (72c).
6. Disconnect and remove a rack (5) from the lower lever (72).

Installation

Installation is carried out as it should be, the return to removal. Replace a nut (5n).