Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Security measures when carrying out body works
   Replacement of brushes of screen wipers
   Replacement of the saloon filter
   Removal and installation of the dashboard
   Removal and installation of the combined understeering switch
   The switch of light of headlights - installation details
   Removal and installation of a combination of devices
   Control lamps and alarm indicators of an instrument guard - an installation detail
   Measuring instruments of a combination of devices - the scheme of an arrangement and detail of installation (model on 10.93 g of the issue)
   Removal and installation of the control unit of the automatic conditioner
   Removal and installation of the push-button control panel of the conditioner (models for 31.08.95 the issue with the Bosch control unit)
   Replacement of control lamps of the push-button control panel of the conditioner
   Check of the pneumatic regulator of an inclination of optical axes of light of headlights
   Switches of the central console - an installation detail
   Removal and installation of the central console
   Loudspeakers - installation details
   Removal and installation of panels of an internal upholstery of doors
   Bumpers - installation details
   The combined relay - installation details
   Forward doors
   Back doors - installation details
   Adjustment of a cowl
   Block headlights - installation details
   The back combined lamps - installation details
   Removal and installation of the RPM meter of the compressor of the conditioner (model for 31.08.95 the issue)
   Check and adjustment of provision of headlights
   Adjustment of a cover of the luggage compartment
   Forward wings and loker of protection of wheel arches - installation details
   Decorative front grille - installation details
   Emblem of "Mercedes"
   Removal and installation of external rear-view mirrors
   Removal and installation of seats
   Removal and installation of head restraints
   Deflectors of air ducts of the dashboard - an installation detail
   Forward indexes of turns - installation details
   Backing fires - installation details
   Cover of a ware box - an installation detail
+ Onboard electric equipment


79c5991e

Removal and installation of panels of an internal upholstery of doors

Forward doors

Removal

Details of installation of the panel of an upholstery of a forward door

1 — the Covering of a forward door
2 — the Triangular cover of an external rear-view mirror
3 — the Lamp of indication of opening of a door
4 — the Wooden panel
5, 7, 9 — Bolts

6 — the Cover
8 — SRS Cover
10 — the Slip
11 — the Cable of management


 PERFORMANCE ORDER

1. Remove the window regulator handle.
2. Remove a triangular cover (2) of an external rear-view mirror.
3. Disconnect the conducting socket from a bulb (3) indications of opening of a door and remove it.
4. Remove the wooden panel (4) (shooter).
5. Disconnect conducting sockets from switches and regulators.
6. Turn off bolts (5) on perimeter of the handle of opening of a door.
7. Disconnect a cover (6) on an armrest and turn off a bolt (7).
8. Uncover SRS (8) and turn off a bolt (9).
9. Remove a slip (10).
10. Press a covering (1) in a door from below, in front and behind.
11. Remove a covering (1) from clamps by means of the screw-driver and after a while remove it from the internal panel of a door.
12. Disconnect a cable of management (11).
13. Remove a covering (1).
14. Check a film and clamps on the internal panel of a door and if it is necessary, replace it.
15. Check clamps on a covering (1) and if it is necessary, replace it.

Installation

Installation is carried out as it should be, the return to removal.

Back doors

Details of installation of the panel of an upholstery of a back door

1 — the Lamp of indication of opening of a door
2, 3 — Bolts
4 — the Wooden panel
5 — the Covering of a back door

Removal

 PERFORMANCE ORDER

1. Remove a bulb of indication of opening of a door.

2. Turn off bolts of fastening of a blocking plate (2) and remove it.

3. Disconnect the wooden panel by means of the tool 140 589 16 63 00, having inserted it between the wooden panel and an upholstery on the door panel.
4. Take the wooden panel.
5. Remove the wooden panel.
6. Turn off bolts on perimeter of the handle of opening of a door.
7. Vypressuyte a door upholstery from the door panel from below, in front and behind by means of the plastic screw-driver (there are 9 clamps).
8. Since a forward top (i) part, take the upholstery panel from the channel so that it was at the same time released from the door panel from below.
9. Disconnect conducting sockets from a covering.

Installation

Installation is carried out as it should be, the return to removal.