Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
- Coupling
   + Coupling
   Driveshaft
   + Power shafts
   - Differential
      Dismantling, assembly and check of differential
      Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels
      Determination of thickness of adjusting laying and its installation in the reducer case
      Check and adjustment of a gap of a flange
      Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels (model 140.28/032/O33 till 31.05.94 of the issue, 140.042/043/063/1 and with a diameter of 210 differential of mm)
      Dismantling and assembly of differential with automatic blocking
      Replacement of the cylinder of differential with automatic blocking (model 140.028/032/033 till 31.05.94 of the issue and 140.1 with a code 211a)
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Dismantling, assembly and check of differential

Dismantling

Differential design


13 — the differential Case 14 — Spherical washers 15 — Satellites 16 — the Finger	17 — Conic gear wheels of power shafts 18 — Persistent washers 19 — the Roller finger

PERFORMANCE ORDER

1. Fix the case of differential (13).
2. By means of a drift beat out a roller finger (19) and a finger of differential (16) from the case of differential (13).
3. Remove satellites (15) with spherical washers (14) and conic gear wheels of power shafts (17) with persistent washers (18).
4. Check each element for lack of wear.

Assembly

PERFORMANCE ORDER

1. Insert a pin (046) into an opening in the differential case. 2. Install both conic gear wheels of power shafts (17) with persistent washers (18) on a pin in the differential case.
3. Install both satellites (15) with spherical washers (14) and turn them by means of a pin (046).
4. Instead of a finger of differential insert a pin (021) into the differential case for fixing of conic gear wheels of power shafts and satellites.

Check

PERFORMANCE ORDER

1. Check the moment of rotation of differential. It has to make 5-30 Nanometers.
2. Establish a finger of differential (16) and a roller finger (19).
3. Take the differential case from a vice.