Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
- Coupling
+ Coupling
Driveshaft
+ Power shafts
- Differential
Dismantling, assembly and check of differential
Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels
Determination of thickness of adjusting laying and its installation in the reducer case
Check and adjustment of a gap of a flange
Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels (model 140.28/032/O33 till 31.05.94 of the issue, 140.042/043/063/1 and with a diameter of 210 differential of mm)
Dismantling and assembly of differential with automatic blocking
Replacement of the cylinder of differential with automatic blocking (model 140.028/032/033 till 31.05.94 of the issue and 140.1 with a code 211a)
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
Check and adjustment of a gap of a flange
|
|
Check and adjustment of a gap between a flange (33) and a conic gear wheel of a power shaft (17) by means of a lock ring |
Check a gap between a flange (33) and a conic gear wheel of a power shaft (17), - in case of need pick up a lock ring (30a) of the corresponding thickness. Rings from 1.4 mm to 2.7 mm thick 1 with a step of 0.05 mm are issued. The nominal rate of size of a gap between a flange and the case of differential makes 0.03 - 0.3 mm.