Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
   Specifications
   Removal and installation of the transmission
   Forward cover of the transmission - an installation detail
   Removal and installation of a back cover of the transmission
   - RKPP 717.438
      Removal and installation of an intermediate case
      Check of a gap of the leading and intermediate shaft
      Dismantling and assembly of the conducted shaft
      Removal and installation of leaders and the conducted gear wheels
      Replacement of the RKPP ball bearings with No. 6141001
      Replacement of conic roller bearings of the transmission to No. 6141000
      The gear shifting mechanism - details of installation of elements
   + RKPP 717.454
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Replacement of the RKPP ball bearings with No. 6141001

Dismantling

Replacement of ball bearings of the transmission with No. 6141001

1a — the Ball bearing of the leading shaft
1b, 43 and 127 — Lock rings
2 — the Leading shaft
20 — the Conducted shaft
40 — the Intermediate shaft

43a — the Back ball bearing of the conducted shaft
43c — the Back ball bearing of an intermediate shaft
43d — the External holder of the bearing
49 — the Intermediate plate
128 — the Forward ball bearing of an intermediate shaft


 PERFORMANCE ORDER

1. Remove the ball bearing (1a) from the leading shaft.
2. Remove a lock ring (43b), a vypressuyta the ball bearing (43a).

3. Remove the roller bearing (43s) and an external holder of the bearing (43d).
4. Remove a lock ring (127) and the ball bearing (128) of an intermediate shaft.
5. Measure distance between the synchronizer of the 3/4th of transfers and a contact surface of an intermediate case (see the Section Removal and installation of leaders and the conducted gear wheels).

Assembly

Assembly is carried out as it should be, the return to removal.

79c5991e