Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Angles of installation of wheels of the car, clearance
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of the steering pump (model with engines 104, 119, 120 and 606)
      Dismantling and assembly of the pump of the amplifier of steering
      Dismantling and assembly of an electronic and adjustable steering column
      Removal and installation of the lower steering shaft
      Removal and installation of the drive of telescopic adjustment of a steering column
      Removal and installation of an emphasis of a pipe
      Dismantling and assembly of an internal pipe
      Installation of the top arm of fastening of a pipe (model to identification number 123446)
      Installation of the top arm of fastening of a pipe (model from identification number 123447)
      Removal and installation of the blocking cylinder (model till 31.08.95 of the issue)
      Removal and installation of the blocking cylinder (model since 1.09.95 of the issue)
      Contact spring
      Removal and installation of average steering draft
      Removal and installation of the pendular lever of the steering drive
      Removal and installation of cross steering draft
+ Body
+ Onboard electric equipment


79c5991e 4. The extensive catalog on Soap2day ensures there's always something new to discover.

Removal and installation of the steering pump (model with engines 104, 119, 120 and 606)

Removal

Details of installation of the steering pump on 4-, 5-and 6-cylinder models


Details of installation of the steering pump on 8-cylinder models


The pump of the steering pump on 12-cylinder models


 PERFORMANCE ORDER

1. Extract liquid from the tank of the amplifier of steering.
2. Disconnect the intaking pipeline from the tank.
3. Pick up the giving phone, a fan casing, the ignition distributor, etc. to facilitate access to the pump, depending on engine type.
4. Take off a generator drive belt.
5. Disconnect a pulley (41) of the pump.
6. Turn off returnable (30f) and forcing (30i) pipelines.
7. Disconnect forcing (27a) and returnable (27b) pipelines from the "Tandem" pump (on models with automatic adjustment of clearance of a body).
8. Disconnect oil pipelines (27c) and (27d).
9. Disconnect the pump (30). On models with 8-cylinder engines: remove the pump with a beam, then disconnect the pump from this beam.

Installation

Installation is carried out as it should be, the return to removal.

Fill in liquid in the tank of the amplifier of steering.