Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
   Specifications
   Removal and installation of the transmission
   Forward cover of the transmission - an installation detail
   Removal and installation of a back cover of the transmission
   + RKPP 717.438
   - RKPP 717.454
      Removal and installation of the sensor of speed of the car (VSS)
      Removal and installation of a forward cover of the transmission
      Removal and installation of a back cover of the transmission
      Removal and installation of an intermediate case
      Replacement of an epiploon of a back cover of the transmission
      Removal and installation of shaft of the transmission
      Dismantling and assembly of an intermediate shaft
      Verification of dimensional characteristics of the transmission
      Replacement of conic roller bearings of an intermediate shaft
      Replacement of ball bearings of an intermediate shaft
      Adjustment of the mechanism of gear shifting
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Replacement of conic roller bearings of an intermediate shaft

Arrangement of conic roller bearings

Arrangement of conic roller bearings


39 — the Forward conic roller bearing 40 — the Intermediate shaft 41 — the Back conic roller bearing 49 — the Intermediate case	78 — the External holder of the back bearing 97 — the External holder of the forward bearing 100 — the Transmission

PERFORMANCE ORDER

1. Vypressuyte the forward conic roller bearing (39) from an intermediate shaft (40).
2. Vypressuyte the back conic roller bearing (41) from an intermediate shaft (40).
3. Carefully to a vypressuyta an external holder of the bearing (97) from the transmission case.
4. Carefully to a vypressuyta an external holder of the bearing (78) from an intermediate case.
5. Measure and adjust distance of "A" (see the Section Verification of Dimensional Characteristics of the Transmission).