Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
- Automatic transmission
   Specifications
   Search of malfunctions - the general information
   - Automatic transmission 722.5
      Removal, check of a state and installation of the converter of rotation (hydrotransformer)
      Removal and installation of the centrifugal regulator
      Removal and installation of the sensor switch of blocking of a starter (permission of start)
      Vacuum knot - installation details
      Removal, service and installation of the secondary pump (AT to No. 3652931)
      Removal and installation of a forward cover with the secondary pump
      Removal and installation of the LB3 piston
      Removal and installation of a back cover of transmission
      Dismantling and assembly of valvate assembly of AT
      Dismantling and assembly of transmission
      Installation and check of a gap in a multidisk brake of B3
      Measurement of a gap in B1 brake
      Coupling of the raising transfer
      Removal, installation and check of components of a brake of BS of the raising transfer and coupling of KS
      Dismantling and assembly of the coupling of a free wheeling
      Dismantling and assembly of planetary mechanisms
      Dismantling and assembly of coupling of K1
      Coupling of K2
      Gear shifting selector lever
   + Automatic transmission 722.6
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Gear shifting selector lever

Removal

Details of installation of the lever of the selector of gear shifting


1 — the Case 2 — the gear shifting selector Lever 6, 42 — Bolts 10 — Draft of gear shifting	40B, 40L — Cables 41 — the Collar 49 — the Clamp S16/9 — the D-contact switch

PERFORMANCE ORDER

1. Disconnect draft of switching (10), having removed a clamp (49).
2. Disconnect the socket from the D-contact switch (S16/9).
3. Remove a stopper (shooter) down and uncover.
4. Weaken collars (41) with bolts (42).
5. Disconnect cables (40L) and (40B) from the gear shifting selector lever.
6. Turn off bolts (6).
7. Remove the gear shifting selector lever up.

Dismantling

Dismantling and assembly of the lever of the AT selector


1 — the Case 2 — the Lever 3, 9, 58 — Covers 4, 22, 25 — Laying 7a — the Insert 8 — the Tape 10 — Draft of gear shifting 12, 57 — Nuts 13 — the Fork 14 — the Dual spring 15 — the Plastic plug 16, 53 — Blocking devices 17, 54 — Fingers 18 — a gear shifting Rod	23, 27 — Rams 26, 55 — Arms 28 — the Switch 30 — the Tube 40B, 40L — Cables 41 — the Collar 42, 52 — the Bolt 44B, 44L — Blocking levers 48 — the Cam 49 — the Clamp 51 — the Basic plate S16/9 — the D-contact switch

PERFORMANCE ORDER

1. Uncover (3).
2. Weaken a nut (12) and unscrew the selector lever gear shifting (2).
3. Remove the ram (27), a cover (9), an insert (7a), a tape (8), the D-contact switch (S16/9), an arm (26), the ram (23), laying (25) and the switch (28).
4. Vypressuyte the blocking device (16) also remove the plastic plug (15).
5. Remove a fork (13) and a dual spring (14).
6. Disconnect sealing laying (22).
7. Vypressuyte blocking device (53).
8. Weaken a basic plate (51), take the blocking lever (44B), (44L) and a cam (48) from the case (1).
9. Disconnect the blocking lever (44B), (44L) from a basic plate (51).
10. Remove fingers (4) and take a shaft of gear shifting (18) from an arm (55). Check a rod (18) for lack of signs of wear and grease it before installation.

Assembly and installation

Assembly and installation is made as it should be, the return to removal.